Digital and analog I/Os - configuration - it's easy!

Created by CS-Lab Support, Modified on Tue, 21 May at 5:00 AM by CS-Lab Support

Configuration of digital and analog inputs and outputs doesn't have to be that hard. In this article we present diagrams which we hope will be very useful in your work.

CSMIO-IO

Some of you had problems with correct configuration and use of CSMIO-IO modules, so we have made a simple sketch for you. It shows a configuration rule for CAN bus address switches and also further use of the module through „Ports and Pins” and VB macros. Before you start the scheme analysis, please read the CSMIO-IO module manual, as the sketch is a kind of summary of the rules described in the manual.

» Open PDF file with larger drawing details

Click to enlarge the diagram>>

CSMIO/IP-S

To fully take advantage of CS-Lab CSMIO/IP motion controllers, please also look at the schemes for using digital and analog inputs and outputs. You can access them through "Ports and Pins” and VB macros. The presented diagrams continue the I/Os articles series initiated by the scheme of CSMIO-IO modules.

» Open PDF file with larger drawing details

Click to enlarge the diagram>>